Used by the grow industry, Professional 400 Volt HPS lamps have a number of key benefits which makes them superior to standard HPS lamps – even ones being run from top-quality digital ballasts.

A 400 Volt HPS lamp is much more efficient than a standard HPS lamp. Both systems consume 1000 watts and therefore cost exactly the same to run but the Pro HPS lamps run at a higher voltage and a lower current. 400 Volt Pro HPS lamps produce more light for the same power consumption and will give at least 10% higher yield compared to even the best standard HPS systems. In fact, when they are seen side-by-side, the HPS Pro lamps are noticeably brighter, run cooler and the light they produce is slightly whiter. So in addition to them giving a higher yield, plants grown under a 400 Volt Pro HPS are healthier, happier and are at less risk of heat damage too.

The way that the system works is that mains power (230 Volts) is fed directly to the combined ballast and reflector via a standard mains power lead. The special ballast then converts the mains electricity to drive the special 400 Volt / 1000 Watt Philips Master GreenPower Plus lamp. The distance from the ballast to the lamp is very short, meaning that virtually no power is lost through the connecting cable.

400 Volt / 1000 Watt Pro HPS Philips Master GreenPower Plus lamps maintain their efficiency and light output for much longer than standard HPS lamps. In fact they will normally last at least a year before they need to be changed out. It should be noted that normal HPS lamps and 400 Volt Pro HPS lamps are NOT interchangeable with different ballasts. Standard HPS lamps should only be used with standard or digital 230 Volt ballasts. 400 Volt Pro HPS lamps should only be used in lighting systems with a 400 Volt Pro HPS ballast. 400 Volt Pro HPS lamps can be identified by the HPS EL marking on them.


  • The highest output (light) due to the overdrive boost and 400V UHF technology

  • Miro Silver Reflector with Single Bounce Clear Sight (SBCS) principle

  • Highly efficient – puts out 2.1 micromole (µmol) per watt

  • The broadest dimming range of all digital ballasts

  • Soft-Start, Soft-Dim, Soft-Off function

  • Can be dimmed manually in 8 levels including the “off” position.

  • Can be variably dimmed and controlled via the Maxi Controller (not included)

  • Extensive diagnostic LEDs

  • EOL function (End Of Life indication to replace lamps)

  • Safety features for preventing short circuits, open contact, high temperatures, too low voltage, too high voltage

  • SBCS -Single Bounce reflector ensures minimal light loss

  • Brighter, cleaner light for maximum yield

  • Less Heat – reduced risk of heat damage to plants

  • Reduce cooling costs

  • No loss of vertical space – ideal for rooms with low or high ceilings

Dimensions 675 x 275 x 130mm (26.5” x 10.8” x 5.1”)

Weight 6.3kg (13.88lbs)

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page